References

  1. GOST 82-70*. Universal hot-rolled steel wide strips. – Moscow, USSR State Standard Committee. (in Russian)
  2. GOST 103-76*. Hot-rolled steel strip. – Moscow, USSR State Standard Committee. (in Russian)
  3. GOST 8239-89. Hot-rolled steel flange beams. Rolling products. – Moscow, USSR State Standard Committee. (in Russian)
  4. GOST 8240-89. Hot-rolled steel channels. Rolling products. – Moscow, USSR State Standard Committee. (in Russian)
  5. GOST 8509-86. Hot-rolled steel equal-leg angles. Dimensions. – Moscow, USSR State Standard Committee. (in Russian)
  6. GOST 8510-86*. Hot-rolled steel unequal-leg angles. Dimensions. – Moscow, USSR State Standard Committee. (in Russian)
  7. GOST 19903-74. Hot-rolled steel sheets. Dimensions. – Moscow, USSR State Standard Committee. (in Russian)
  8. GOST 19904-90. Cold-rolled steel sheets. Dimensions. – Moscow, USSR State Standard Committee. (in Russian)
  9. GOST 16350-80. Climate of USSR. Zoning and statistical parameters of climatic factors for technical purposes. – Moscow, USSR State Standard Committee. (in Russian)
  10. GOST 22356-77*. High strength bolts and nuts and washers. General specifications. – Moscow, USSR State Standard Committee. (in Russian)
  11. GOST 26020-83*. Hot-rolled steel I-beam with parallel flange edges. Dimensions. – Moscow, "Stroyizdat". (in Russian)
  12. GOST 26633-91. Heavy-weight and sand concretes. Specifications. International standards. – Moscow, "Standartinform". (in Russian)
  13. GOST 27751-88. Reliability of constructions and foundations. Principal rules of the calculations (ST SEV 384-87). – Moscow, USSR State Standard Committee. (in Russian)
  14. GOST 27772-88*. Rolled products for structural steel constructions. General specifications. – Moscow, USSR State Standard Committee. (in Russian)
  15. A.V. Perelmuter, L.A. Gildengorn, On classification of building structures / Structural mechanics and analysis. – 1990. – N3. – pp. 67-70. (in Russian)
  16. SNiP II-21-75. Concrete and reinforced concrete structures. Building standards and regulations. – Moscow, "Stroyizdat". – 1976. – 89 p. (in Russian)
  17. SNiP ІІ-23-81*. Steel structures: Building standards and regulations / Ministry of Construction of Russia. – Moscow, 1996. – 96 p. (in Russian)
  18. SNiP 2.03.01-84*. Concrete and reinforced concrete structures. Building standards and regulations / State Committee of Russia for Construction. – Moscow, 2001. – 76 p. (in Russian) 
  19. Guide to design of steel structures (to SNiP ІІ-23-81*) / Kucherenko Centr. Res. Inst. for Building Structures, USSR State Committee for Construction, Moscow, 1989. – 148 p. (in Russian)
  20. V.T. Vasilchenko, A.N. Rutman, E.P. Lukianenko, A manual for steelwork designers. – Kiev, "Budivelnik", 1980. – 288 p. (in Russian)
  21. Steel structures. Designer’s manual. Ed. by N.P. Melnikov. – Moscow, "Stroyizdat", 1973. – 328 p. (in Russian)
  22. EN 1993-1-8:2005. Eurocode 3: Design of steel structures – Part 1-8: Design of joints.
  23. EN 10025-2:2004. Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels.
  24. EN 10025-3:2004. Hot rolled products of structural steels – Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels.
  25. EN 10025-4:2004. Hot rolled products of structural steels – Part 4: Technical delivery conditions for thermomechanical rolled-weldable fine grain structural steels.
  26. EN 10025-5:2004. Hot rolled products of structural steels – Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance.
  27. EN 10025-6:2004. Hot rolled products of structural steels – Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition.
  28. EN 10210-1: 2006. Hot finished structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions.
  29. EN 10219-1:2006. Cold formed structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions.
  30. EN 1993-1-1:2005. Eurocode 3: Design of steel structures – Part 1-1: General structural rules.
  31. EN 1090-1:2009. Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components.
  32. EN 1992-1:2001. Eurocode 2: Design of concrete structures – Part 1: General rules and rules for buildings.
  33. EN ISO 898-1:1999-12. Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs.