Bolted Connections. Data Control

m ≥ 1

c_maxL ≥ с ≥ 1,5d₀

a_maxL ≥ a ≥ a_min

r ≥ 0,95d₀ + R₁ + t_L

b_L - r ≥ 1,2d₀

d₀ is the diameter of a bolt hole;

a_maxL is the maximum distance between bolts of the end row;

a_maxT is the maximum distance between bolts of the middle row;

a_min is the minimum distance between the bolts;

R₁ is the corner radius of the rolled profile;

t_L is the angle thickness;

b_L is the angle width;

h_w is the I-beam flange thickness;

H is the I-beam height;

c_maxL is the maximum distance to the profile edge;

t₀ is the thickness of the main structure.

m ≥ 1

c_maxL ≥ с ≥ 1,5d₀  

a_maxL ≥ a ≥ a_min;     a_maxL ≥ b ≥ 0,5a_min

r ≥ 0,95d₀ + R₁ + t_L

b_L - r - b ≥ 1,2d₀

m ≥ 1

c_maxL ≥ с ≥ 1,5d₀  

a_maxL ≥ a ≥ a_min;    a_maxL ≥ b ≥ a_min

r ≥ 0,95d₀ + R₁ + t_L

b_L - r - b ≥ 1,2d₀

m ≥ 1

n ≥ 1

c_max ≥ с ≥ 1,5d₀  

a_maxT ≥ a ≥ a_min;    a_maxT ≥ b ≥ a_min

m ≥ 1

n ≥ 1

c_max ≥ с₁ ≥ 1,5d₀  

a_maxT ≥ a ≥ a_min;    a_maxT ≥ b ≥ a_min

n ≥ 1

c_max ≥ с₁ ≥ 1,5d₀  

с₁ ≥ 1,5d₀  

a_max ≥ b ≥ a_min

H - nb ≥ 2L₁

L₁ - c ≥ (H - h_w)/2