Monolit enables you to design reinforced concrete monolithic ribbed and flat floor slabs. As the initial data, this program can use the results of selection of the reinforcement in the elements of reinforced concrete structures, obtained using either SCAD or other programs. The system has been developed in compliance with the current standards:
SNiP 2.03.01-84*. «Concrete and Reinforced Concrete Structures. Construction Standards and Regulations»;
SNiP 52-01-2003 (SP 52-101-03). Concrete and reinforced concrete structures;
SP 63.13330. Concrete and reinforced concrete structures;
GOST 21.201-2011 and GOST 21-501-2011 (DSTU B A.2.4-7-95). System of design documents for construction. «Rules for execution of architectural and construction working drawings»;
GOST 21.1101-2013 (DSTU B A.2.4-4-99). System of design documents for construction. «Main requirements for design and working documents»;
GOST 7473-94 (DSTU B V.2.7-96-2000). Ready-mixed concrete. Specifications;
GOST 14098-91. «Welded joints of reinforcement and inserts for reinforced concrete structures». Types, constructions and dimensions.
Moreover, the following publications were used when developing Monolit:
«Manual on designing concrete and reinforced concrete structures from heavy-weight and light-weight concrete without prestressing the reinforcements.»;
«Guide to designing concrete and reinforced concrete structures from heavy-weight concrete (without prestressing)»;
Reference manual «Designing of reinforced concrete structures».