Updates
21
april
2020
SCAD++
Add-ins for data exchange with Revit 2021 and Tekla 2020 has been added.
2
april
2020
SCAD++, Arbat
In the case of selection of reinforcement in the rod elements according to SP 63.13330, the user can now specify the following additional option - increase the area of longitudinal reinforcement when implementing Sec. 8.1.34 of SP 63.13330.
19
march
2020
SCAD++
For plates and shells, the DCS criterion max(|Qx|+|Qy|) is added
16
march
2020
SCAD++
Direct integration of the equations of motion of the physically nonlinear system is implemented.
15
march
2020
SCAD++
In the case of the analysis of reinforced concrete plates according to SP 63.13330, the user can now specify the following additional options – use the formula (8.106) and limit the distance between cracks according to the recommendations of Sec. 8.2.17.
10
march
2020
SCAD++, Kristall
Additional options for selecting steel sections allow to specify the restrictions on the height, width and reduced thickness of a section (if the fire resistance analysis is enabled).
6
march
2020
SCAD++
Calculation of the principal and equivalent stresses has been refined for rectangular hollow sections has been refined.
28
february
2020
SCAD++
Seismic analysis according to EN1998-1 is implemented.
24
february
2020
SCAD++
Environment settings allow selecting the displayed size of hinges.
19
february
2020
SCAD++, Arbat
The selection and check of the following types of fiber reinforced polymer (FRP) rebar are implemented in accordance with the requirements of SP 295.1325800: glass, basalt, carbon, aramid, and hybrid.