SCAD++

The indication of the number of loads on the nodes has been added.

SCAD++

Font settings can be saved/loaded to an external file.

Arbat

The mode for selecting reinforcement in a section has been added.

SCAD++

The reinforcement selection can be invoked from the Information on a bar element.

SCAD++

The Bar division operation now enables to select the reference point (first or second node of the element).

SCAD++

The punching analysis has been refined for the case of the absence of transverse reinforcement and the presence of plates of different thickness near the punching node.

SCAD++, Kristall

When calculating steel structural members, non-standard values of service factors can be specified for seismic actions (in particular, requirements for calculating structures under low temperatures can be taken into account).

Decor

When calculating timber structural members, non-standard values of service factors can be specified for seismic actions.

SCAD++

When determining the design combinations of displacements and deflections in bars, it is now possible to determine combinations from permanent and long-term loads. Limitations from characteristic long-term loads can now be set for structural members as well.

SCAD++

When the calculations are performed according to KMK 2.01.03-96 (Uzbekistan), limit relative inelastic deformation of elements can now be specified.

SCAD++

The meshing quality can now be improved for solid finite elements as well.

SCAD++

Loadings/groups of loads can now be renumbered.