Updates
26
july
2016
SCAD++
When copying the model, it is now possible to copy both the entire model and its visible part (with the generation of elements).
12
july
2016
SCAD++
Add-in has been added for the data exchange with Revit 2017.
The display of the subsoil parameters in the preprocessor has been corrected for the projects of the Erection type.
When checking the specified reinforcement of bar elements in the uniaxial stress state, the factors for crack opening width were sometimes not displayed. It has been corrected.
5
july
2016
Arbat
The punching analysis according to SP 63.13330.2012, SP 52-101-03 has been refined for the case of the high intensity of transverse reinforcement.
4
july
2016
SCAD++
The error in the dynamic analysis of the impact has been corrected.
Right-clicking on the table invokes a menu which enables to check or uncheck all checkboxes, invert the selected checkboxes, select nodes and/or elements.
27
june
2016
SCAD++
Floors can be created in the Forum preprocessor by transforming the selected beams into a floor contour.
23
june
2016
SCAD++
The duplicate rigidities are now deleted together with duplicate subsoil parameters.
17
june
2016
Profiles according to GOST 2590-2006, GOST 2591-2006 have been added to the assortment of rolled profiles.
15
june
2016
SCAD++
The rigidity names can now be inherited when changing the rigidities of steel structural members based on the results of the selection.
14
june
2016
SCAD++
A graph of the accumulation of the percentage of modal masses can now be plotted.
The error in the Include the group of loads in the existing loading operation has been corrected.
9
june
2016
SCAD++, Arbat
The designation of the transverse reinforcement in bar elements has been changed. Wz,Wy is used instead of W1, W2.
When specifying the reinforcement of bar elements, it is now possible to view the areas of reinforcement and the arrangement of rebars.