SCAD++

When creating the combinations of loadings, it is now possible to take into account safety factors for loads and coefficients of the fraction of duration automatically.

SCAD++

When using the “Duplicate along the axis” operation, you can now select X, Y or Z axis as the direction of duplication.

When specifying the characteristics of elements, it is now possible to select the rules for assigning these characteristics — For all the selected ones/Without the replacement of the earlier specified ones/Only with the replacement of the earlier specified ones.

SCAD++, Arbat

The error of using the Gamma_b1 coefficient has been corrected for the case, when the calculations are performed according to SP 63.13330.2012 and SP 52-01-2003 and there are special (but not seismic) loadings in SCAD and wind loadings in Arbat.

WeST

The error in the calculation of temporary loads according to SP 20.13330.2011 has been corrected.

The error in saving the data on the location for SP 20.13330.2011 has been corrected.

Decor

The error in the calculation of longitudinal forces in one of the types of rafters has been corrected.

Kristall

The calculation of welded connections for different weld legs has been refined.

SCAD++

When specifying the loads on bars, plates and solid elements, it is now possible to specify/edit the loads of the self-weight type.

The import of DXF and DWG files has been improved. It is now possible to import files with nested modules.

The error in displaying the deflections for combinations of loadings has been corrected.

KAMIN

Verification examples for the analysis of axially compressed columns and an external wall have been added.

SCAD++

Plugin has been developed for the data exchange with Tekla 2016.

SCAD++

When the calculations are performed according to NP-031-01, it is now possible to allow for the proximity of frequencies.

SCAD++

When the punching analysis is performed according to SP 63.13330.2012, the program takes into account the holes near the punching node.