SCAD++

The option of autosaving the model has been added.

SCAD++

The dialog boxes with the DCF and principal and equivalent stresses (from the information on the element) now enable to sort the data.

The energy postprocessor now enables to obtain the sign of the total energy of the subsystem when analyzing the elements with positive and negative energy.

SCAD++

The drawing of rigid bodies and operations with them have been fixed.

Directions of the force output can now be set automatically in all plate elements (the direction along the X axis of the global coordinate system is set for horizontal elements, and that along the Y axis is set for vertical elements).

Kristall

The calculation of bolted and welded connections has been refined.

The assortment of rolled profiles of Poland has been added.

SCAD++, Arbat

The specification of service factors for concrete at the calculations according to SP 63.13330.2012 and SP 52-101-03 has been changed.

SCAD++, Kristall, COMET

The selection of steel has been changed in accordance with the modification No.1 to GOST R 54257-2010.

SCAD++

Color scales now contain an indication of the number of nodes/elements corresponding to certain colors and a distribution histogram by the number of nodes/elements.

SCAD++

Three-node finite elements can now be divided into four-node ones.

Non-planar or non-convex four-node finite elements can now be divided into three-node ones.

Kristall

The calculation of friction connections according to SP 16.13330.2011 has been refined. 

SCAD++

A set of verification examples for the stability analysis has been expanded.

The status bar now contains an indication of the number of selected nodes and/or elements.

When outputting the results of the reinforcement selection you can now obtain the result as the area of transverse reinforcement with the specified spacing or as its intensity.

The meshing quality can now be improved.

Arbat

The calculation of transverse reinforcement according to SP 63.13330.2012 and SP 52-101-03 has been refined.

SCAD++

The calculation of transverse reinforcement of bars according to SP 63.13330.2012 and SP 52-101-03 has been refined.

The error in the documentation of the results of the calculation of forces for combinations of loadings has been corrected.

SCAD++

The numbers/names of rigidities can now be output when the color scale of rigidities is activated.
Add-in has been added for the data exchange with ArchiCAD 18.

A color scale for the coefficients of variation of the elastic modulus (at the erection analysis) has been added

SCAD++

Add-in has been added for the data exchange with Tekla 20.

Add-in has been added for the data exchange with Revit 2015.