Arbat

The error occurring when specifying and subsequently deleting the data on side reinforcement has been corrected.

SCAD++

A perspective image can now be obtained.

The error in the stability analysis for the case of bars with the rigidities obtained by Section Builder has been corrected.

The error in the erection analysis has been corrected.

Decor

The error in the calculation of beams that occurred at some combinations of loads has been corrected.

SCAD++

The errors in filling the stamp when printing the results of the check of steel structures have been corrected.

The error in the DCF documentation has been corrected.

The error in the Improve the meshing quality subsystem occurring when there were bars in the meshing area has been corrected.

SCAD 11.7

The calculation of solid finite elements has been refined.

Monolit

Design codes can now be selected.

SCAD++

The errors in the stability analysis for the case of solid finite elements have been corrected.

The meshing quality can now be improved.

User interface errors that occurred when running SCAD Office in a Windows environment with Asian languages.

SCAD++

The meshing subsystem has been improved – you can now perform the meshing of several contours without exiting the meshing mode.

Drawing of grid lines has been improved.

Animation of displacements has been improved.

KAMIN

The calculation of eccentrically compressed columns has been refined

The calculation of reinforced structures has been refined

Kristall

The analysis of stability of in-plane bending of asymmetric welded I-beams has been refined.

SCAD++

The analysis of stability of in-plane bending of asymmetric welded I-beams has been refined.

You can now obtain the statistical data (dimensions of the model, distribution by types of elements, distribution by types of rigidities, total weight of elements with the given type of rigidity, ...).

You can now save a deformed model with prestressing.

You can now output the percentage of modal masses.

Cross

The speed of the calculation and drawing of isofields has been increased.

SCAD++

The error in the DCF calculation at the erection has been corrected

Drawing of diagrams on сable-stayed elements has been corrected

The information on the percentage of modal masses can now be output

The import/export of ANSYS data has been added.

Plug-in for importing data from Revit 2015 has been added

Arbat

The data control error in the Slab Check mode has been corrected.

SCAD++

The error in DCF when considering the crane loads has been corrected.

The control of steel and reinforced concrete structural members has been corrected.

The dialog box for transforming the selected reinforcement into the specified one has been changed.

The error of saving the display filters has been corrected.

Slope

The error in drawing a section in the report has been corrected.

SCAD

Changes have been made for better compatibility with spr-files exported from SCAD++.